HSM 405H2 8WD

An "all-rounder" is one way of describing the HSM 405H2. An above-average machine for forestry management work. The concept of the H2 is growing in popularity. With the production of this harvester, HSM covers the demand from medium to thick trunk timber operations. This is backed up by performance figures. Whether it is the L220 crane from Loglift with 10m reach, 175 kN pulling force, 700/50 26.5 tyres or the 172 kW common rail diesel engine from Iveco, HSM combines high performance with the highest level of quality and impressive offroad capability in the 405H2. The concept is rounded off with harvester heads from Waratah that have proven their worth a thousand times over.

The HSM 405H2 harvester – a premium class forestry engineering package.

Technical Data 405H2 8WD

Engine (6 cylinder):

VOLVO PENTA
TAD882VE EU Stage V
Power: 210 kW (286 HP) from 1700 rpm
Max. revolution: 1225 Nm from 1100 - 1600 rpm
Max. torque 1255 Nm at 1400 rpm
Displacement: 7,7 liters

Transmission:

Hydrostatic-mechanical
NAF 2-speed transfer gearbox

Axles:

NAF balanced portal tandem axles
Front: 100 % selectable differential lock
Rear: 100 % selectable differential lock

Brake:

2-circuit brake, disk brakes running in an oil bath
Spring-loaded parking brake

Steering:

Articulated steering with 2 cylinders
2 steering cylinders, 50° steering angle

Tyres:

	Size:	Total width:
Series:	710/45-26,5	2880 mm tapes and chains
Optional:	800/40-26,5	2980 mm only tapes
		3060 mm tapes and chain
	600/55-26,5	2660 mm tapes and chains

Tank capacity:

Diesel: 500 l
AdBlue: 45 l
Hydraulic oil: 250 l

Hydraulic system:

Load sensing
Variable pump (working pump):
Crane pump: 190 cm³Head pump: 190 cm³flow rate: 532 l/min at 1400 rpm
pressure: up to 380 bar
Hydraulic oil: saturated synthetic ester
Panolin HLP SYNTH with Kleenoil
Microfiltration; WGK 1

Cabin:

Height-adjustable at the front / rear +10° / -29°
Bent Lexan windscreen
Windscreen wipers in the front and at the side
ROPS, FOPS, OPS tested safety cab
Air cushioned seat with seat heating
Hot water heating
Auxiliary heating with cooling water and hydraulic oil preheating
Air conditioner
Optional height-adjustable and rotatable (270°),
front / rear +10° / -12°, (restricted to -24°) lateral +/- 9°
Optional: Sun blinds

Electrics / Instruments:

HSM Ecommand colour display
5 driving programs + factory setting
Diagnostics function and error display
Graphical support for editing parameters
110 A (28 V) generator
2 maintenance-free dry-cell batteries, each with 75 Ah

Weight:

from 25.400 kg

Torsion lock:

2 hydraulic cylinders

Crane:

Mesera M221 H100 / H110
Range: 10 m / 11 m
Lifting moment gross: 188 kNm
Slewing torque: 43,6 kNm
Slewing angle: 260°
Tilt angle: +24°/-30°

Optional:
Mesera M240 H103 / H111
Range: 10,3 m / 11 m
Lifting moment gross: 240 kNm
Slewing torque: 54 kNm
Slewing angle: 260°
Tilt angle: +24°/-30°

Aggregate:

Logmax 6000
Felling diameter: 650 mm
Delimbing diameter: 500 mm
Max. feed force: 26,9 kN
Max. feed force speed: 4,2 m/s
Max. operating pressure: 280 bar
Weight: 1.330 kg
Control: LOG Mate
Other aggregates on request

Standard equipment:

20 LED work lights on the cab, 4 work lights in front of the crane, 2 LED work lights on the crane column, 2 LED work lights on the rear frame, bogie lift front separately switchable, voltage converter on-board voltage 24 V to 12 V, end cushioning for crane and steering cylinder, radio, fire extinguisher, first-aid kit, warning triangle, tool set, bypass filter, Diesel fill pump, hydraulic fill pump, vacuum pump

Special equipment: