HSM 904F Kombi long

Today, HSM has become synonymous with powerful forestry machines that protect the ground and harvested product through the consistent further development of the machinery. Protecting the ground means increasing manoeuvrability on skid trails. HSM is highly committed to this.
With the 904F Kombi long, HSM demonstrates that increasing manoeuvrability on skid trails is also possible for heavy and powerful machines. A well-conceived drive concept, wide tyres compatible with traction chains and flexible construction are decisive for the sustained use of forestry machinery. The success of our customers also relies on a forwarding quality that assures subsequent orders.

Providing support for this success still remains HSM's main objective.

Technical data model series 904

Engine (6 cylinder):

VOLVO PENTA
TAD881VE EU Stage V
Power: 185 kW (252 HP) from1600 rpm
Max. revolution: 1150 Nm from 1100 - 1500 rpm
Max. torque: 1175 Nm at 1400 rpm
Displacement: 7,7 liters

Optional:
VOLVO PENTA
TAD882VE EU Stage V
Power: 210 kW (286 HP) from 1700 rpm
Max. revolution: 1225 Nm from 1100 - 1600 rpm
Max. torque: 1255 Nm at 1400 rpm
Displacement: 7,7 liters

Transmission:

904H: HSM High Speed Drive (71 series);
speed at 1st gear 0-14 km/h
904ZF: ZF 6WG-190 load switching converter transmission
6 forward gears, 3 reverse gears

Axles:

Planetary axles
100 % separately selectable differential locks, front and rear

Brake:

2-circuit brake, disk brake running in an oil bath
Spring-loaded parking brake

Steering:

Articulated steering with 2 cylinders, 45° steering angle

Tank capacity:

	904H:	904ZF:
• Diesel:	210 l	225 l
• AdBlue:	45 l	45 l
• Hydraulic fluid:	110 l	150 l

Hydraulic system:

Load sensing
Variable pump (working pump) 904H:
flow rate: 304 l/min at 1600 rpm
pressure: up to max. 350 bar
Variable pump (working pump) 904ZF:
flow rate: 224 l/min at 1600 rpm
pressure: up to max. 350 bar
Hydraulic oil: Saturated synthetic ester
Panolin HLP SYNTH with Kleenoil
Microfiltration; WGK 1

Cabin:

HSM Panorama comfort cab (see brochure page 12-13)
ROPS, FOPS, OPS tested safety cab
Swivel seat device, air-suspended comfort seat
Heating/air-conditioning

Electrics / Instruments:

HSM Ecommand colour-display
5 operator programs + factory setting
Diagnosis-tool and error-indication
Graphic support at parameter editing
Generator 110 A (28 V)
2 service-free dry batteries á 55 Ah

Special equipment:

Tiltable front polder shield, trailer hitch, outer hydraulic connection, remote control for cable winch, wireless driving, auxiliary heating, sun blinds, seat area dampers
Other accessories on request

Technical details 904F Kombi long

Winches:

Series:
Adler HY 20-SG (2 x 100 kN) double-drum winch
Max. cable take-up 14 mm, 100 m
Optional:
Adler HY 24-SG (2 x 120 kN) double-drum winch
Max. cable take-up 14 mm, 130 m
Adler HY 32-SG (2 x 160 kN) double-drum winch
Max. cable take-up 14 mm, 130 m

Weight:

from 17 .800 kg

Payload:

11 t

Crane:

Epsilon M70 F80 (series)
For further cranes see crane brochure

Tyres:

		Standard 24,5-32 710/45-26,5	30,5-32 710/45-26,5
904H	Dv	1831	1857
	Dh	1465	1485
	B*	2430	2730
	H	3769	3776
	F	672	679

904ZF	H	3769	3776
	F	545	552

* B: minimum machine width (dimensions in mm)

Standard equipment:

Headboard grid and first stanchion removable
Last stanchion can be removed and adjusted to 2,4 m, 3,2 m and 4,05 m
Height-adjustable roller block
Torsion lock with hydraulic cylinder
Reversing camera with color monitor
LED rear headlights

Special equipment:

Front polder shield
Straight shield
Clamping workbench with quick-change plate
Twin stanchions as 2nd and 3rd stanchion on quick-change plate
Rotating stanchion
Bogie lift at the rear
Tiltable crane
Remote control, wireless driving
Other accessories on request

HSM Crane-lists

HSM Crane-list EPSILON

X = available with surcharge, O = standard equipment, # = not available

EPSILON

Crane type	Lifting moment	Range	Gripper type	904F / Kombi
M70 F80	102/68 kNm	8,0 m	FG43S	O
M70 F86	102/68 kNm	8,6 m	FG43S	X
M70 F101	102/65 kNm	10,1 m	FG43S	X
M80 F80	114/79 kNm	8,0 m	FG43S	X
M80 F86	114/79 kNm	8,6 m	FG43S	X
M80 F101	114/75 kNm	10,1 m	FG43S	X
S100 F80	128/91 kNm	8,0 m	FG43S	X
S100 F86	128/90 kNm	8,6 m	FG43S	X
S100 F101	128/86 kNm	10,1 m	FG43S	X
S110 F80	143/104 kNm	8,0 m	FG43S	X
S110 F86	143/104 kNm	8,6 m	FG43S	X
S110 F101	143/100 kNm	10,1 m	FG43S	X
X120 F80	159/111 kNm	8,0 m	FG43S	X
X120 F86	159/110 kNm	8,6 m	FG43S	X
X120 F102	159/107 kNm	10,2 m	FG43S	X
X140 F80	173/123 kNm	8,0 m	FG43S	X
X140 F86	173/122 kNm	8,6 m	FG43S	X
X140 F102	173/119 kNm	10,2 m	FG43S	X

Low crane pillar (height: 1730 mm)

HSM Crane-list Mesera

X = available with surcharge, O = standard equipment, # = not available

Mesera

Crane type	Lifting moment	Range	Gripper type	904F / Kombi
F71 F72	99/75 kNm	7,2 m	FG43S	X
F71 FT85	99/70 kNm	8,5 m	FG43S	X
F71 FT100	99/66 kNm	10,0 m	FG43S	X
F71 FT100i	99/66 kNm	10,0 m	FG43S	X
F83 F72	106/82 kNm	7,2 m	FG43S	X
F83 FT85	106/76 kNm	8,5 m	FG43S	X
F83 FT100i	106/73 kNm	10,0 m	FG43S	X
M 92 F80i	130/84 kNm	8,0 m	FG43S	X
M 92 FT86i	130/84 kNm	8,6 m	FG43S	X
M 92 FT100i	130/84 kNm	10,0 m	FG43S	X
F111 F72	151/111 kNm	7,2 m	FG43S	X
F111 F85	151/100 kNm	8,5 m	FG43S	X
F111 FT85	151/100 kNm	8,5 m	FG43S	X
F111 FT91	151/98 kNm	9,1 m	FG43S	X
F111 FT100	151/101 kNm	10,0 m	FG43S	X
M122 F85i	155/110 kNm	8,5 m	FG43S	X
M122 F96i	155/ - kNm	9,6 m	FG43S	X
M122 FT100i	155/ - kNm	10,0 m	FG43S	X
M142 F85i	178/132 kNm	8,5 m	FG43S	X
M142 F96i	178/124 kNm	9,6 m	FG43S	X
M142 FT100i	178/ - kNm	10,0 m	FG43S	X